tech:ignite
Table of Contents
Ignite
This page is for the installation, configuration and maintenance on Ignite Devices.
These devices include:
- MetroLinq 60-35
- MetroLinq Omni FCC
- MetroLinq 2.5 60-35
- MetroLinq LW FCC
MAC Address Authentication
Ignite devices all require MAC address authentication. For service to work, the address of the device plugged into the LAN port on the POE must be entered into powercode.
To find a MAC address on an ignite, please follow this ignite_mac guide
Initial Setup
Configuring an Ignite can be done by following our Ignite Setup guide
tech/ignite.txt · Last modified: 2024/10/02 02:50 by 127.0.0.1